TEM Microstructure and Chemical Composition of Transition Zone Between Steel Tube and An Inconel 625 Weld Overlay Coating Produced by CMT Method

Journal title

Archives of Metallurgy and Materials




vol. 62


No 2


Divisions of PAS

Nauki Techniczne


Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Commitee on Metallurgy of Polish Academy of Sciences




DOI: 10.1515/amm-2017-0117 ; ISSN 1733-3490


Archives of Metallurgy and Materials; 2017; vol. 62; No 2


Zhihui Wang (1993), Study of the martensite structure at the weld interface and the fracture toughness of dissimilar metal joints, Weld Res Suppl, 397. ; Chung (2011), Microstructure and stress corrosion cracking behaviour of the weld metal in alloy - dissimilar welds, Mater Trans, 52, 508. ; Rowe (1999), Hydrogen - induced cracking along the fusion boundary of dissimilar metal welds, Weld J, 31. ; Górnikowska (2013), Influence of boiler pipe cladding techniques on their microstructure and properties, Arch Metall Mater, 58, 1993. ; Eliaz (2002), Characteristic of hydrogen embrittlement stress corrosion cracking and tempered martensite embrittlement in high - strength steels, Eng Fail Anal, 9, 167. ; Pickin (2011), Characterisation of the cold metal transfer process and its application for low dilution cladding, Mater Process Technol, 211. ; Feng (2009), The CMT short - circuiting metal transfer process and its use in thin aluminium sheets welding, Mater Des, 30, 1850. ; DuPont (2007), Technical Note : Martensite formation in austenitic / ferritic dissimilar alloy welds, Weld J, 51. ; Mvola (2014), Dissimilar ferrous metal welding using advanced gas metal arc welding proceses, Rev Adv Mater Sci, 38, 125. ; Li (2015), An investigation on microstructure and properties of dissimilar welded Inconel and SUS using high - power CO laser, Int J Adv Manuf Technol, 76, 625. ; Górnikowska (2015), Microsegregation and precipitates in Inconel arc weld overlay coatings on boiler pipes, Arch Metall Mater, 60, 625. ; Chen (2015), TEM observations of martensite layer at the weld interface of an A III to Inconel dissimilar metal weld joint, Metall Mater Trans A, 46, 508. ; David (2015), Weldabillity and weld performance of candidate nickel base superalloys for advanced ultrasupercritical fossil power plants part fundamentals, Sci Technol Weld Joining, 7, 532. ; DuPont (2012), Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds, Int Mater Rev, 4, 208. ; Górnikowska (2014), Microstructure and microsegregation of an Inconel weld overlay produced on steel pipes by The Cold Metal Transfer technique, Arch Metall Mater, 59, 625.