During drilling through aquifers using the rotary drilling method with drilling fluid application, the phenomenon of formation clogging in near-well zone takes place. This leads to physical changes in pore spaces in consequence of the deposition solid phase particles originating from the drilling fluid. Due to this fact, filtration velocity in the clogged zones of the aquifer formation decreases, which results in increased pressure drawdown and decreased well hydraulic efficiency. Therefore, it causes a reduction of the well total capacity. The article consists of studies connected to the development of the mud which will constitute the basis for a complex mud system intended for hydrogeological drilling in different encountered geological conditions. In the framework of laboratory research, technological parameters of six, commonly applied in oil and gas industry, polymer agents as well as new agent developed at the Drilling, Oil and Gas Faculty AGH-UST in Krakow were examined. The undertaken studies showed that the new agent, marked as CAGEx, provides the required technological parameters and can be applied as a base for drilling muds intended for hydrogeological drilling. The undertaken industrial research of the new CAGEx drilling mud carried out while drilling water intake well, confirmed the great stability of its technological parameters as well as insignificant influence on rock permeability damage in filter zone. The water intake well is characterized by high hydraulic efficiency and does not require additional activation treatment.
Blockchain is a technology, which could revolutionize many industries in the future. A system like that is based on a chain of blocks that is used for storing and transferring various data, forming a decentralized ledger. Although various fundamental projects based on the blockchain system in the energy industry are in their early stage of development, as well as other solutions, applications of blockchain technology in the broadly understood power engineering sector are considered to have a very large potential. This paper presents a brief description of the blockchain technology, its general operating principle and the possibilities it brings. The next section of the article contains a characterization of two exemplary and possible blockchain technology applications, which in the perspective of time may have a significant impact on the power engineering sector. The first solution is related to carrying out energy transactions, which could be conducted in an easy way directly between energy producers and consumers. Thanks to blockchain technology, this could lead to a partial decentralization in that area. The second proposed example concerns energy resources origin tracking, which would allow fixed origin attributes and parameters affecting the environment to be assigned to the generated energy. By implementing that solution, it would be possible to construct a fuel footprint of individual generating units. The article also mentions examples of other potential applications of blockchain technology in the power engineering sector.
The Epistle of Barnabas, usually included in the works of the Apostolic Fathers, is an anonymous text written in koiné Greek. It was probably composed between the end of the First and the beginning of the Second Century in an Egyptian or Syro-Palestinian setting. The text is made up of two parts: the first one has an anti-Judaic apologetic nature; the second one is instructive and paraenetical. The Latin version of the Epistle (L), which is useful in the constitutio textus of the original too, concerns the first of the two parts. An analysis of the language and of the technique of translation allows asserting that L was probably compiled in Rome between the end of the Second and the beginning of the Third Century. Moreover, its main features may be identified in the literality and in the linguistic and stylistic popularity. The literality is both quantitative and distributional: the changes are usually narrow (except expressions which introduce Biblical quotations) and concern parts which may be considered accessory by a semantic point of view. The popular style is due to the attention the translator pays to the needs of the sociocultural situation of the readers and is confirmed by the presence of rhetorical figures as alliteration. These two characteristics, which are typical of Latin translations of Greek Patristic texts compiled between the end of the Second and the beginning of the Third Century, are due to stylistic choices which are homogeneously and congruently applied. Moreover, in L these characteristics are strictly bound, because the sermo humilis characterizes the Greek text too.
In a dynamic machining process, distortion in surface irregularity is a very complex phenomenon. Surface irregularities form a periodic representation of the tool profile with various kinds of disturbance in a broad range of changes in the height and length of the profile. To discern these irregularity disturbances, interactions of the tool in the form of changes perpendicular and parallel relative to the workpiece were analyzed and simulated. The individual kinds of displacement of the tool relative to the workpiece introduce distortions in the changes of height and length. These changes are weakly represented in standard height and length irregularity parameters and their discernment has been found through amplitude-frequency functions.
In the article a short historical outline of noise control conferences organized in Poland is given. Those conferences with the participation of Polish specialists have been organized since 1964; since 1976 they have been evolved into International Noise Control Conferences. Silhouettes of four Polish scientists, which have made a large contribution to the noise and vibration control in Poland, are presented. Also the current state of threats by noise and vibrations have been briefly mentioned. The significance of such conferences has been emphasized.
The work deals with experimental and numerical thermodynamic analyses of cross-flow finned tube heat exchangers of the gas-liquid type. The aim of the work is to determine an impact of the gas non-uniform inlet on the heat exchangers performance. The measurements have been carried out on a special testing rig and own numerical code has been used for numerical simulations. Analysis of the experimental and numerical results has shown that the range of the non-uniform air inlet to the considered heat exchangers may be significant and it can significantly affect the heat exchanger efficiency.