According to the most popular conceptualization of materialism by Richins and Dawson it consists of three components: acquisition centrality, acquisition as the pursuit of happiness and possession -defined success. They are usually combined and an overall indicator of materialism is used commonly in various studies. In the article the three components are examined separately. Differences in their nature are revealed in a theoretical analysis, whereas in two empirical studies the ways they connect with well -being are presented. The results show that the overall materialism explains much less variance of well -being than the three components taken separately. Of the three the possession-defined happiness is the most detrimental to all aspects of well -being. The possession -defined success does not connect with well -being at all. Finally, acquisition centrality elevates hedonic and psychological well -being. The conclusion is that the modest effect of materialism on well -being, usually identified in various studies, is probably at least partly due to conflicting forces existing within the construct.
As of the spring of 2017, the HAŁDY Database is available on the Polish Geological Institute – NRI website. The geodatabase contains information and data on waste mineral raw materials collected on old heaps, industrial waste stock-piles and in post-mining settlers, from the Polish part of the Sudety Mountains. The article presents the types of data and information contained in the geodatabase and the methodology for their collection. As a result of four-year research works, field reconnaissance, archives and geological basic research, 445 objects of former mining and mineral processing were inventoried. There are 403 mine heaps, 16 industrial settlers, 23 stock-piles and 3 external dumps. These are mainly objects after coal mining and metal ores, including post-uranium. The greatest opportunities for the economic use of waste are associated with coal sludge accumulated in settlers of the liquidated Lower Silesian Coal Basin. The material from stone heaps after polymetallic, iron and fluorite ore mining is also easy to use. The issue of the economic use of post-flotation copper ore waste or the recovery of metals (including gold) from dumps of arsenic mining remains open. The limitation here is the efficiency of metal recovery technologies and environmental restrictions. Some of the objects are located in protected areas, which excludes the possibility of waste management. Some stock-piles and heaps should be carefully reclaimed and covered by environmental monitoring, due to their harmful impact on environmental components.
The paper presents brown coal as one of the two basic domestic energy raw materials apart from hard coal. Historically, the use of brown coal in Poland is primarily fuel for the power plants. It was used for the production of lignite briquettes in small quantities and as fuel for local boiler houses and as an addition to the production of fertilizers (Konin and Sieniawa). At present, after changes in the case of the quality of fuels used in local boiler plants, brown coal remains as a fuel for the power plants in almost 100%. Currently, the brown coal industry produces about 35% of the cheapest electricity. The cost of electricity production is more than 30% lower than the second basic fuel – hard coal. The existing fuel and energy complexes using brown coal, with the Bełchatów complex at the forefront, are now an important guarantor of Poland’s energy security. In contrast to the other fuels such as: oil, natural gas or hard coal, the cost of electricity production from brown coal is predictable in the long term and almost insensitive to fluctuations in global commodity and currency markets. Its exploitation is carried out using the high technological solutions and respecting all environmental protection requirements, both in the area of coal extraction and electricity generation. Importantly, the fuel and energy complexes using brown coal showed a positive profitability so far and generated surpluses enabling the financing of maintenance and development investments, also in other energy segments. In particular, the sector did not require and has yet not benefited from public aid in the form of, for example, subsidies or tax concessions. Polish brown coal mining has all the attributes necessary for long-term development to ensure the country’s energy security. The document which is a road map for the brown coal industry is the Program for the Brown Coal Mining Sector in Poland adopted by the Council of Ministers on May 30, 2018. The Program covers the years 2018–2030 with a perspective up to 2050 and presents the development directions of the brown coal mining sector in Poland together with the objectives and actions necessary to achieve them. The Program presents a strategy for the development of brown coal mining in Poland in the first half of the 21st century. Possible scenarios have developed in active mining and energy basins as well as in new regions with significant resources of this mineral. This is to enable the most efficient use of deposits in the Złoczew and Konin regions as well as the Gubin and Legnica brown coal basins, and then deposits located in the Rawicz region (Oczkowice) as well as other prospective areas that may eventually replace the existing active mining and energy areas. This will allow power plants to continue to produce inexpensive and clean electricity, using the latest global solutions in the field of clean coal technologies.
Karl Marx (and also Friedrich Engels, by the way) was – contrary to his own opinion – an author of several utopias which played a role in the 20th century. The question (which is of both historical-philosophical and historical-empirical character) therefore arises how important this role was. The author focuses on the characteristics of Marxian utopias, and specifically – on their axiological content and current relevance. According to the author, Marx’s utopias can be a convenient starting point for searching for various projects (political, economic, technological etc.) necessary to cope with global challenges that mankind faces in our time. The author is also considering Marx’s motives for a critical approach to utopias and points to those of them which in his opinion should be accepted, while distinguishing them from others which should be rejected.
The first Mineral Policy in Poland was prepared in 1938. In that time The Mineral Policy was primarily dedicated to preparing Poland for a defensive war. The Central Geology Authority (CGA) was created in 1991. The main task of this Authority was preparation plans (annual and multiannual) of geological-exploration. The CGA’s activities were focused on enhancing the resource base of mineral deposits. As of 1985 the coordination of geological tasks is the main duty of the Chief Geologist of the country. In 1996 the Council of Ministers adopted a document called State policy in the field of mineral resources, prepared at the Ministry of Environmental Protection, Natural Resources and Forestry as well as the Ministry of Industry and Trade. In 2015 a wide public discussion about the need to develop a mineral raw materials policy, initiated by the publication of three analytical documents prepared by the Demos Foundation, Professor J. Hausner and the Ministry of the Environment took place. Milestones in the development of a national mineral raw materials policy was the establishment of the special government’s plenipotentiary as well as the inter-ministerial team for mineral raw materials policy. In 2018, The Mineral Raw Materials Policy was transferred for public consultation. This document is the first document that is so comprehensive and holistic from the point of view of national mineral security interests. The Mineral Raw Materials Policy is based on 9 substantial pillars among them: economical and legal basis of mineral sector activities, investment risk, geological prospection and exploration, utilization of mineral wastes.
The Legnica deposit is one of the most prospective in the context of future lignite mining. Its extraction will be inseparable from the removal of the rocks of the overburden, the volume of which is very large. Due to the raw material properties, some of the rocks can be classified as accompanying minerals. The raw material identification of overburden sediments in the Legnica lignite deposit is insufficient. So far, they haven’t been the subject of detailed and comprehensive research to prove their usefulness. The article was a summary of the knowledge on this subject. The following should be included in the accompanying minerals: Quaternary sands and gravels, tertiary sands and clays (Poznan clays). They are present in two colour variants in the Legnica deposit - and fiery. The mineral composition of greenish-blue clays allows them to be included in illite-kaolinite- smectite varieties, in turn fiery clays as kaolinite-illite-smectite varieties. The tertiary clays are a very useful raw material for the production of building materials. In addition, they are potential mineral sorbents due to the nature of the association of clay minerals (occurrence of montmorillonite). They also show suitability for building waterproofing barriers. Quaternary gravels and sands, developed in the overburden Legnica deposit are differentiated raw materials. Some of them are raw materials for the construction industry. The glacial tills can be used as a component of ceramic mixtures. Tertiary sands can be used as a proppant material. The information on the raw material properties of these sediments will be one of the essential criteria for their treatment as accompanying minerals. Minerals accompanying those developed in the Legnica deposit should be exploited and deposited selectively. The creation of anthropogenic deposits accumulating these minerals will provide the possibility of their use for decades after the termination of operation.
The article investigates the level of language awareness manifested by the advanced learners of Polish as a FL (146 students of the Polish Language Course attending the School of Polish Language and Culture at the University of Silesia in Katowice, Poland). The exact focus is on learning outcomes (areas of language progress and regress), and perception of the Polish language material learnt (including grammar, vocabulary and phonology), an emphasis being put on most problematic issues. Having presented learners’ opinions and reflections on language, implications for teachers including teaching materials raising language awareness are offered.
The authors established the chemical and phase compositions of grain fractions of the magnesia carbon scrap disintegrated using industrial cone crushers. The investigations included chemical and XRD analyses and optical investigations. The contents of admixtures: SiO2, CaO, Fe2O3 and Al2O3 increase with the decreasing size of the scrap grain fractions, whereas the C/S ratio decreases in finer and finer fractions due to changes of the phase composition. These relations are caused by the presence of low-fusible silicate phases, characterized by their cleavage and brittleness. Such phases were mainly derived from the graphite ash containing a high silica content. The scrap after removing its finest grain fractions can be recycled and utilized for producing the magnesia-carbon refractory materials. However, the finest grain fractions may be used, e.g. as a component of gunite mixes. Many years of experience collected by the ArcelorMittal Refractories Ltd., Krakow, Poland in the field of refractory scrap utilization has also been presented.
Obtaining a pure product by mixing together raw materials, so as to carry out a chemical reaction at high selectivity, is a difficult part of manufacturing chemical products. How can we test reactors and mixers to ensure the efficient use of energy?
Stefan Żeromski and Florian Znaniecki, perceived by many of their contemporaries as undisputed moral authorities, warned in the fi rst period of the existence of the Second Polish Republic against the danger of infl uence of Bolshevik ideology. They undertook issues of fundamental importance for the understanding of mutual relations and conditions between the socio-economic world, art, material prosperity, revolution and progress in the period after the First World War (1914–1918), when the power of the Bolsheviks had strengthened in Russia, and the Poles formed the foundations independent homeland. This text is an attempt to approximate the position of Żeromski and Znaniecki in this matter.
The intercalation into interlayer spaces of montmorillonite (MMT), obtained from natural calcium bentonite, was investigated. Modification of MMT was performed by the poly(acrylic acid-co-maleic acid) sodium salt (co-MA/AA). Efficiency of modification of MMT by sodium salt co-MA/AA was assessed by the infrared spectroscopic methods (FTIR), X-ray diffraction method (XRD) and spectrophotometry UV-Vis. It was found, that MMT can be relatively simply modified with omitting the preliminary organofilisation – by introducing hydrogel chains of maleic acid-acrylic acid copolymer in a form of sodium salt into interlayer galleries. A successful intercalation by sodium salt of the above mentioned copolymer was confirmed by the powder X-ray diffraction (shifting the reflex(001) originated from the montmorillonite phase indicating an increase of interlayer distances) as well as by the infrared spectroscopy (occurring of vibrations characteristic for the introduced organic macromolecules). The performed modification causes an increase of the ion exchange ability which allows to assume that the developed hybrid composite: MMT-/maleic acid-acrylic acid copolymer (MMT-co- MA/AA) can find the application as a binding material in the moulding sands technology. In addition, modified montmorillonites indicate an increased ability for ion exchanges at higher temperatures (TG-DTG, UV-Vis). MMT modified by sodium salt of maleic acid-acrylic acid copolymer indicates a significant shifting of the loss of the ion exchange ability in the direction of the higher temperature range (500–700°C).
Magnetic properties of silicon iron electrical steel are determined by using standardized measurement setups and distinct excitation parameters. Characteristic values for magnetic loss and magnetization are used to select the most appropriate material for its application. This approach is not sufficient, because of the complex material behavior inside electrical machines, which can result in possible discrepancies between estimated and actual machine behavior. The materials’ anisotropy can be one of the problems why simulation and measurement are not in good accordance.With the help of a rotational single sheet tester, the magnetic material can be tested under application relevant field distribution. Thereby, additional effects of hysteresis and anisotropy can be characterized for detailed modelling and simulation.
In view of the world’s recent changes in the mineral market, it is becoming increasingly important to ensure the sustainable and secure supply of raw materials, both within the European Union and in other high-developed countries. In response to this global challenge, as part of the European Commission’s Horizon 2020 Program for Research & Innovation, the 36-month INTRAW project was launched in February 2015 to foster international cooperation on raw materials. The EU-funded INTRAW project was set up to map and develop new cooperation opportunities related to raw materials between the EU and other technologically advanced countries, such as: Australia, Canada, Japan, South Africa and the United States. The first stage of the project was a review of conditions for the stable supply of raw materials from primary and secondary sources in selected countries: the United States, Canada, Australia, South Africa and Japan. The results of the work are two groups of comprehensive reports. The first of these is a broad contextual analysis of geological, environmental, political, technical -economic and social factors conducive to the effective management of mineral resources. The second group is operational reports, carried out in three thematic blocks: industry and trade, research and innovation, education. The analysis clearly shows that the basis for effective action in this area is a stable political, economic and institutional environment, which is friendly to mining and new entities wishing to invest in modern technologies, the exploration and exploitation of deposits. Investors are encouraged by tax regulations, sometimes also by direct government financial support and efficient licensing procedures. The well-defined protection of property rights, also for deposits is equally important. Selected aspects of a wide analysis of determinants of competitiveness for these countries were presented in the article below.
The problem of deposit protection and the process of liquidation of mining plants does not find effective solutions in the national law. Nevertheless, this is a very up-to-date issue. This situation prompted the authors of the article to once again analyze these issues. The number of abandoned exploitation sites which were published in the Polish Geological Institute reports should affect the entire licensing system and the state’s raw material policy. As a good host of raw materials, which we have been given by Earth Mother, we cannot allow that the mining licensing system, the liquidation procedures of mining plants without due diligence, result in the lack of protection of these deposits. The rational raw material economy and the ability to exploit it for the future generations, while failing to effectively enforce the site liquidation process makes it necessary to take actions leading to not blocking the mineral deposits in this way. The analysis shows what appropriate actions should be taken. The authors have thoroughly investigated the legal regulations over the past century, compiling them with the current legislation, and pointing out the weaknesses of the system in the field of deposits protection, particularly in the part of the unexploited deposits. Criticism covered both the statutory regulations – Geological and mining law as well as executive acts in the field of deposit protection. A separate analysis was subjected to the procedure of liquidation of the mining plants in the aspect of deposits protection, for mining plants operating on the basis of the Province Marshal’s licenses. The process presented in the flowchart layout clearly shows the weak points of the currently operating system.
The Tertiary lignite formations in the Bełchatów deposit, along with coal, are built of plastic, weakly compact and loose rocks. Their physical and mechanical parameters, don’t pose operational problems. However, varieties of a different lithological character and physical-mechanical properties rocks, causing difficulties when mining the overburden rocks, appear within them. These include: Mesozoic limestones, Tertiary sandstones and conglomerates, as well as Quaternary iron feldspar rocks. The article features a lithological characterization as well as values of basic physico-mechanical parameters. They form the basis of the geological engineering classification and decide about their difficult workability. The possibilities of their raw material utilization were also discussed.
An attempt to summarize the primary iron raw materials and steel market’s hundred years history as well as influence of economic indicators on the iron ore deposit qualification for extraction has been undertaken in the paper. Steel products are crucial to the world economy, and their production has a major impact on the environment. The main factor is the huge scale of the production and growth rate, unprecedented among minerals. Iron ore and concentrates production has increased more than thirty times over the past century, and the geological resource base at the current level of consumption has provided almost 250 years of sufficiency. There have been tremendous changes in the world geography of the ore and steel industry. The iron ore mining industry is the driver of other economic activities (land transport, freight, metallurgy) and involves huge capital and human resources. The consumption of iron raw materials is also considered as an important indicator of the countries development and current or even future economic situation. Population growth remains one of the key stimulating factors. The prices of ore and iron concentrates depend on the quality of the raw material, delivery conditions, market balance and the weight of the ordered cargo. They are usually the subject of negotiations. In the past, they were long-term contracts, while short-term (yearly, quarterly) and current spot transactions are now significant. The prices of ores and concentrates in relation to steel prices are showing a strong correlation. The average iron content of the reserves has been reduced in the largest producers in the 21st century, however it does not translate into the quality of mining output. Exploitation of the richer parts of the mineral deposit is usually carried out. The high content of iron in the output is a response to the technological requirements of the metallurgy where the blast furnace charge should contain at least 56% Fe and 5–8% FeO. The current surplus of geological-mining supply (large resource base) justifies that a mineral deposit choice, destined for excavation, is economic profit maximization as well as social and environmental considerations.
There are approx. 250 coal waste dumping grounds in Poland, yet there are countries in which this number is even higher. One of the largest sites for depositing mining and power plant waste in the Upper Silesian Coal Basin is the Przezchlebie dumping ground. In the article, it is considered as a secondary deposit of raw materials. An assessment of mining waste collected on the Przezchlebie dumping ground was carried out in terms of its impact on the environment and the possibility of its use. Mining waste samples were tested to determine their chemical composition. Physicochemical properties and chemical compositions of water extracts obtained from the investigated waste and groundwater in the vicinity of the dumping ground were analyzed. Due to the fire hazard resulting from the natural oxidation process of chiefly carbonaceous matter and pyrite, the thermal condition of the dumping ground was assessed. The results of the obtained tests confirmed the slight impact of mining waste deposited on the Przezchlebie dumping ground on the environment. The chemical composition, low radioactive activity of waste itself and the results of water extract tests referred to the permissible values according to the Polish Journal of Laws allow for multi-directional waste management. Due to the significant carbon content, the risk of self-ignition poses a significant threat on the dumping ground. Re-mining of the dumping ground and the recovery of raw materials, including coal contained in waste, will eliminate the risk of fire, allowing for a wider use of waste and, at the same time, will allow for other benefits, e.g. in the form of financial resources and the possibility of managing the dumping ground area.
Middle Palaeolithic land exploitation strategies remain as yet an unexplored element in our understanding of Neanderthal behavioural patterns. Many different approaches to the problem were so far developed. Among others, biological, economic or environmental data concerning Neanderthals were considered as relevant. One of the focus points in such divagations is the issue of raw materials economy as undertaken by Neanderthals. The long-distance transport of knappable minerals (as a basis for the stone tools production) allows an insight into the economy and understanding of the size of land in use by Neanderthals group. Addressing this particular issue from the perspective of the Western Carpathian Mountains allows us to track the trails of mobility or trace possible contact zones between groups, and also to state, that at least in some circumstances Neanderthal groups were infiltrating and possibly crossing this highly elevated area on the S-N axis.
The accurate prediction of iron losses has become a prominent problem in electromagnetic machine design. The basis of all iron loss models is found in the spatial field-locus of the magnetic flux density (B) and magnetic field (H). In this paper the behavior of the measured BH-field-loci is considered in FEM simulation. For this purpose, a vector hysteresis model is parameterized based on the global measurements, which then can be used to reproduce the measurement system and obtain more detailed insights on the device and its local field distribution. The IEM has designed a rotary loss tester for electrical steel, which can apply arbitrary BH-field-loci occurring during electrical machine operation. Despite its simplicity, the proposed pragmatic analytical model for vector hysteresis provides very promising results.
Ensuring access to a stable supply of a number of raw materials has become a serious challenge for domestic and regional economies with limited production, the EU economy alike. Reliable and unconstrained access to certain raw materials is an ever more serious concern. In order to tackle this challenge, the European Commission has established a list of Critical Raw Materials (CRMs) for the EU, which is regularly reviewed and updated. In its Communication COM(217) 490 final of September 13, 2017, the European Commission presented an updated list of 27 critical raw materials for the EU as a result of a third assessment based on a refined methodology developed by the Commission. Economic Importance (EI) and Supply Risk (SR) have remained the two main parameters to determine the criticality of a given raw material. The list of critical raw materials for the EU includes raw materials that reach or exceed the thresholds for both parameters set by the European Commission. The only exception is coking coal (included in the list of critical raw materials for the first time in 2014) which, although not reaching the economic importance threshold, has been conditionally kept on the 2017 list for the sake of caution. Should it not fully meet this criterion, it will be withdrawn from the list during the next assessment. The article discusses the most important changes to the methodology used in the third review and their impacts on the coking coal criticality assessment. It presents the geographical structure of coking coal global production and consumption as well as the degree to which the EU is reliant on coking coal imports. Raw materials, even if not classified as critical raw materials, are essential for the European economy as they are at the beginning of manufacturing value chains. Their availability may change rapidly due to developments in trade flows or trade policy, which reveals the general need for the diversification of supply.
The article analyzes the present state of the phosphate raw material base to meet Ukrainian chemical enterprises’ needs. In Ukraine, a number of complex apatite and phosphorite deposits have been explored. Their exploitation can lead to a complete supply of Ukrainian chemical enterprises with raw materials and can partly reduce the amount of expensive imported phosphate mineral fertilizers. At present, the following deposits, where apatite is connected with other useful components, are prepared for exploitation: Stremyhorod, Fedorivka, Novopoltavka, Kropyvna and others. The advantage of the development of these deposits is the possibility to extract apatite along with the production of rare earth concentrates, ilmenite, titanomagnetite, as well as feldspars, olivine, pyroxenes, mica and others which will significantly increase the profitability of the deposits development. The alternative to apatite-containing deposits in Ukraine can be sedimentary deposits of nodule, granular and mixed type phosphorites. Phosphorite deposits can be used mainly for the production of phosphorite and limestone flour. Considerable resources of granular phosphorites have been discovered in Volyn-Podillia and Dnieper-Donetsk which are considered to have a various agricultural effect. They are environmentally friendly ores without impurity which prevents plants from cesium, strontium and reduces nitrates in the soil. Arranging the exploration of phosphorite ores in certain parts of Volyn-Podillia basin and Dnieper-Donets Rift is recommended.
Simplifications used in simulation program codes require the use of substitute parameters in the material databases (also called apparent or substitutive). On the one hand, they formally fit into the records used in the heat flow model, porosity, properties etc. and on the other hand they should be determined in conditions most similar to the real casting-mould system. The article presents results of a research on thermophysical parameters of gypsum mould used for precision casting moulds. Experiments were carried out on a cylindrical mould made of Plasticast gypsum, in which the heat source was a cylinder filled with liquid aluminium alloy of the temperature of 655°C. Energetic validation was carried out by using the NovaFlow&Solid ver. 6.3 simulation code. As a result of validation tests, substitute thermophysical parameters of gypsum were determined. For determined parameters, best-fit of solidification time from the experiment and simulation was obtained and the curves of gypsum mass heating were satisfactorily recreate.
This paper reviews research at the Institute of Materials Science and Engineering, Poznań University of Technology, on the synthesis of nanocrystalline hydride electrode materials. Nanocrystalline materials have been synthesized by mechanical alloying (MA) followed by annealing. Examples of the mate2-, LaNi5 and Mg2Ni-type phases. Details on the process used and the enhancement of properties due to the nanoscale structures are presented. The synthesized alloys were used as negative electrode materials for Ni-MH battery. The properties of hydrogen host materials can be modi?ed substantially by alloying to obtain the desired storage characteristics. For example, it was found that the respective replacement of Fe in TiFe by Ni and/or by Cr, Co, Mo improved not only the discharge capacity but also the cycle life of these electrodes. The hydrogen storage properties of nanocrystalline ZrV2- and LaNi5-type powders prepared by mechanical alloying and annealing show no big di?erence with those of melt casting (polycrystalline) alloys. On the other hand, a partial substitution of Mg by Mn orAl in Mg2Ni alloy leads to an increase in discharge capacity, at room temperature. Furthermore, the e?ect of the nickel and graphite coating on the structure of some nanocrystalline alloys and the electrodes characteristics were investigated. In the case of Mg2Ni-type alloy mechanical coating with graphite e?ectively reduced the degradation rate of the studied electrode materials. The combination of a nanocrystalline TiFe-, ZrV2- and LaNi5-type hydride electrodes and a nickel positive electrode to form a Ni-MH battery, has been successful.
Elaborated shapes of many car components are the reason for which the use of casting techniques to fabricate them is a solution wellfounded from the economical point of view. Currently applicable regulatory requirements concerning emissions of exhaust fumes force the carmakers to reduce the overall weight of their products, as this is a basic precondition for reducing fuel consumption. As a result, newly launched car models contain a continuously increasing share of thin-walled castings made of materials which ensure a satisfactory level of service properties. At the same time, developing new technological processes allowing to extend the service life of individual components by means of surface improving becomes more and more important.
The aim of this paper is to consider the not so well investigated problem of the role that language has played in Karl Marx’s thinking. The first section discusses several examples of Marxist attempts at philosophical or linguistic reflection on language. I propose the thesis that Marxist meaning theory did not seriously evolve due to the domination of the ‛Traditional Meaning Theory’ (TMT) – irrespective of the actual social conditions. In the second section I undertake some adumbrations on the tendencies of contemporary philosophy of language, such as externalism or pragmatism, whose premonitions can be found in Marx. I also point out that combined with historical materialism they can no longer fit TMT. Finally, I argue that the notion of language and the division of linguistic labor may solve some issues of Marx’s conception of ideology.