In Poland, researchers have a very strong interest in archaeometallurgy, which, as presented in classical works, focuses on dating artefacts from the prehistoric and early medieval periods in the form of cast iron and copper castings. This study, extending the current knowledge, presents the results of a microstructure investigation into the findings from the Modern era dating back to the late Middle Ages. The investigated material was an object in the form of a heavy solid copper block weighing several kilograms that was excavated by a team of Polish archaeologists working under the direction of Ms Iwona Młodkowska-Przepiórowska during works on the marketplace in the city of Czestochowa during the summer of 2009. Pre-dating of the material indicates the period of the seventeenth century AD. The solid copper block was delivered in the form of a part shaped like a bell, named later in this work as a “kettlebell”. To determine the microstructure, the structural components, chemical composition, and homogeneity, as well as additives and impurities, investigations were carried out using light microscopy, scanning electron microscopy including analysis of the chemical composition performed in micro-areas, and qualitative X-ray phase analysis in order to investigate the phase composition. Interpretation of the analytical results of the material’s microstructure will also help modify and/or develop new methodological assumptions to investigate further archaeometallurgical exhibits, throwing new light on and expanding the area of knowledge of the use and processing of seventeenth-century metallic materials.
Archaeometallurgical investigations presented in this work focus on analysing the microstructure as well as mechanical properties of artefacts from the17th in form of findings performed from cast iron as well as copper casts. The presented research results extend the up-to-date knowledge and present the analysis of structural compounds found in the microstructure of the artefacts from the time dating back to the late Middle Ages in the region around Czestochowa, Poland. The tested samples were found in earth in the city centre under the present marketplace. The excavation works were carried out in summer in the year 2009, and have resulted in the excavation of artefacts in form of copper block of the weight of several kg. The excavation action was led by a group of Polish archaeologists collaborating with the local authorities. The performed pre-dating of this element determines the age of the artefacts as the 17th century AD. The excavations that have been taking place since 2007 have widened the knowledge of the former Czestochowa. Historians of this town have suggested, that the found weight and traces of metallurgical activity suggest that the exposed walls were an urban weight. The weight is visible on the 18th century iconography. What was find on the Old Market indicates that there was a lush economic life before the Swedish invasion in this part of Poland. Some buildings lost their functions or were changed, others died in fires, but new places developed. To describe the microstructure, with its structural components, research was done using microscopy techniques, both of the light as well as electron microscopy (SEM), also chemical composition analysis was carried out using the EDS technique, as well as tool for phase analysis were applied in form of X-Ray Diffraction (qualitative analysis), especially for the reason to describe the phases present in the excavated material. This research will help to obtain new information in order to investigate further archaeometallurgical artefacts, extending the knowledge about middle age metallic materials its usage and manufacturing.
Rock excavation is a basic technological operation during tunnelling and drilling roadways in underground mines. Tunnels and roadways in underground mines are driven into a rock mass, which in the particular case of sedimentary rocks, often have a layered structure and complicated tectonics. For this reason, rock strata often have highly differentiated mechanical properties, diverse deposition patterns and varied thicknesses in the cross sections of such headings. In the field of roadheader technology applied to drilling headings, the structure of a rock mass is highly relevant when selecting the appropriate cutting method for the heading face. Decidedly differentiated values of the parameters which describe the mechanical properties of a particular rock layer deposited in the cross section of the drilled tunnel heading will influence the value and character of the load on the cutting system, generated by the cutting process, power demand, efficiency and energy consumption of the cutting process. The article presents a mathematical modelling process for cutting a layered structure rock mass with the transverse head of a boom-type roadheader. The assumption was made that the rock mass being cut consists of a certain number of rock layers with predefined mechanical properties, a specific thickness and deposition pattern. The mathematical model created was executed through a computer programme. It was used for analysing the impact deposition patterns of rock layers with varied mechanical properties, have on the amount of cutting power consumed and load placed on a roadheader cutting system. The article presents an example of the results attained from computer simulations. They indicate that variations in the properties of the rock cut – as cutting heads are moving along the surface of the heading face – may have, apart from multiple other factors, a significant impact on the value of the power consumed by the cutting process.
Caving in the excavation of mining galleries is a dangerous phenomenon, resulting in a threat to the health and life of humans, technological difficulties (transport, ventilation, etc.) and economic losses. Mining galleries list: design errors, runtime errors, errors and random causes among the causes of the caving occurring in recent periods in the excavation of underground coal mines. Examples in the recent period of caving in the excavation of mining galleries in coal mines indicated that one of the main causes of the situation was the loss of capacity and double timber technical wear caused by the corrosion of the profile. In practice, the caving that occur as a result of the technical wear can be divided into the breaking arc of a roof – bar, the loss of stability of one of the heading walls and a total heading collapse. On the basis of the carried out analysis of these cases, guidelines were proposed for improving the safe operation of the workings. The improvement of support stability may be achieved by applying additional supports, stabilizing the structure by bolting the support sets or by introducing a fiber-reinforced concrete coating with injection into the rock mass. Examples of caving occurring in the excavation, for which the preparatory selection of support does not match the geological-mining conditions, were also presented. The summary indicated the importance of diagnostics roadway in the safe and efficient conduct of mining that should be covered by the operational rules, and their scope and frequency should be adapted to the rank of the occurrence of hazard and support construction.
This article describes stability issues of main excavations in deep copper mines in Poland, from the perspective of mining work safety. To protect main transportation and ventilation routes, parts of rock are left untaken to form so-called protective pillars. The problem was to determine the size of main excavations protective pillars in deep underground copper mines in which provide stability of main excavations. The results of numerical simulations of the stability of protective pillars under specific geological and mining conditions are presented, covering: underground depth and width of protective pillar, number, size and layout geometry of protected excavations, as well as the impact of parameters of surrounding gob areas. Problem was solved applying numerical simulations based on the finite element method which were performed in a plane state of strain by means of Phase2 v. 8.0 software. The behavior of the rock mass under load was described by an elastic-plastic model. The Mohr-Coulomb criterion was used to assess the stability of the rock mass. The results of numerical modeling have practical applications in the designing of protective pillars primarily in determining their width. These results were used to prepare new guidelines for protective pillars in Polish copper mines in the Legnica-Glogow Copper District.
In the process of extraction and enrichment of coal waste, considerable quantities of waste material are produced, mainly the gangue and coal sludge, considered as waste or raw material. The main directions of the management development of the waste rock are the production of aggregates, the production of energy products and the liquidation works in hard coal mines and the filling of excavations. The paper proposes the extension of these activities to the use of waste material. The possibility of using aggregates or extractive waste to fill open-pit excavations has been proposed, also in areas within the reach of groundwater and the possibility of building insulation layers of waste material and the production of mixtures of hard coal sludge and sewage sludge to produce material with good energy properties. The analysis was based on the author’s own research and literature data related to selected parameters of waste material. This paper presents our own preliminary studies on the amount of combustion heat and the calorific value of coal sludge combined with other wastes such as sewage sludge. The proposed methods and actions are part of the current directions of development, but they allow the extension of the scope of use of both extractive waste and products produced on the basis of gangue or coal sludge. Due to the frequent lack of the stable composition of these materials, their current properties should be assessed each time before attempting to use them. The fact that it is important to continue research to promote existing economic use and to seek new activities or methods has been concluded.